How to install molding and add interest to basic walls

I’ve been working on this wall molding project for almost four months and it’s finally done!! Geesh. I started it right after I finished the HUGE wall of bookcases in the basement but I kept getting distracted by other projects that were brighter and shinier. 😉 
The mud/laundry makeover and the garage clean out and organization took up a couple of those months. And then I was just…well, tired from all of that. A couple of weeks ago I finally started up this panel molding project again. 
It took longer than expected because when do a project like this, one thing always snowballs into a million other smaller projects. Every. time. But I’m REALLY loving how it turned out and I’m also really happy I added all of the smaller projects. 
When I finished the wall of built ins down here, I knew right away that the other walls needed something: 
I’ve planned to do these molding boxes for a long time, but knew I needed to wait until after the built ins were done to determine the size. 
We LOVE the dark, moody gray we have down here (Westchester Gray), but painting the walls made me even more sure that the wainscoting would look REALLY good:
Disney ride poster wall
I had to decide on the design first — I only had three wall sections that I wanted to add trim to. I took a photo of one wall and then added lines using my phone editing. 
The traditional two boxes was what I initially wanted to do: 
Figuring out size of panel molding
But I thought I’d try out adding one more at the top and loved it: 
Three box panel molding
This post may contain affiliate links for your convenience. 
See my policies and disclosure page for more information.  
I used the simple decorative trim I used in our dining room as well. It’s simple but elegant, and not crazy expensive: 
Simple decorative trim for wainscoting

You can find it at Menard’s, Home Depot and Lowe’s. It was harder to find this time though! It feels like everyone in the world is working on DIY projects right now. 🙂 
I painted our walls in a flat sheen, but I always use semi-gloss on trim. I painted so many of these eight foot pieces…with brushes, rollers, and then with my favorite find, this little paint pad: 

Painting pad for trim
It was great because I could just dunk it in the paint in the can — no need to pour into a tray. It got into the little groves easily and made quick work of the painting. I think I got mine at the dollar store, but this is a whole set! I usually wait until the trim is on the wall to paint, but since I was doing a different sheen I painted before. 
I installed the crown molding and then cut scrap pieces of wood in the sizes I needed to space out my boxes. Each box was 3.5 inches away from the nearest wall (except for around the window where I did twice that to accommodate for the drapes). 
I spaced each panel two inches from the top, bottom and between each box:

Using measured scrap to space trim

Having those cut helps tremendously…you can easily check to see that everything is spaced out the way they should be. I also checked for level as I was installing them as well. 
I finally bit the bullet a few months ago and bought this battery-powered nail gun and it is a game changer! I’ve been carrying around a compressor and fighting the air tubing for 15 years. The cordless nailer is SO much more convenient, but definitely heavier. 
The molding needs to be cut at a 45 degree angle because of the detail:  
45 degree cut for wall molding boxes

This is why I usually paint after the trim is on the wall — after caulking and filling holes, you have to do more coats anyway: 
Filling and caulking trim work
Although I didn’t caulk at all with this trim. It fits pretty flat against the wall. Get the nails into studs where possible, and for other spots you can nail at an angle to secure it well. 
When I was done I knew there were some more things I wanted to tackle. Those skinny molding boxes at the top were crying out for some lighting! I so wish I had all of these ideas in my head when we were building, because I would have added electricity then. 
But I didn’t, so I went with my go-to, the battery operated sconces I used in our wallpapered foyer upstairs:
Brass battery operated art lights
I shared how to add sconces without electricity as well here! It’s such a great hack. These art lights are great — I just don’t love the brass tone. So like last time, I sprayed them a more consistent brass color. 
I moved some of the art around, changed up some of the decor and painted the baseboards to match the rest of the walls. At the last minute I also added some additional trim in the angled part under the stairs:
Panel molding under stairs

That took me forEVER. The angles were not computing in my head and it was a couple hours of checking angles and going up and down the stairs to the garage to cut. Twenty-five times or so.
I moved the mirror that was here and replaced it with these AWESOME round whicker wall hangings
Large round wicker art
Holy cats, I love them so much. So, so much. I want to hang them all over the house! They look so good and you get the whole (huge!) set for under $100. 
All of the projects were SO worth it…it looks so good!!:
Panel molding on dark gray walls

Dark gray walls with wood and brass accents

Gray bookcase and wall molding

Three panel wainscoting on walls

Large gray sectional with chaise
I always love crown molding in a room too. It’s a traditional touch that adds so much character. 

I love this space most at night when we have the recessed and bookcase lights dimmed and the art lights turned on:

Dark gray walls with wood accents
Vintage wood dresser gray walls

Huge framed ikea world map
The molding is the perfect finishing touch down here. If I’ve said it once I’ve said it a million times…trim work makes SUCH a big difference for not a lot of money. I spent about $150 for the molding, but it usually costs less than that. (The trim has gone up $2 each since I bought it a few months ago!)
I used a lot because of the three sections and large size, so this project could easily be done for under $100!
Here are a few before and after pics…this space has seen so many DIY projects over the past four years!: 
before boring wall
TV entertainment center wall
Large ikea world map art
Dark gray walls family room
Lazboy gray sectional with chaise
Dark gray walls basement family room

Analytical gray family room walls

Cozy basement family room with dark gray walls

We are spending more time down here than ever! It’s definitely our favorite spot in the house lately: 
Large wall panels using molding
I’m so happy to have another project crossed off the list. Now onto easier items like some organizing! 

Questions? Here are the projects and items in our basement family room:

Built in bookcase how-to

Changing out the recessed lighting to brighter/more efficient fixtures
Drapes and giant map are from IKEA
Dresser is vintage
Rug was a HomeGoods find years ago
See how I added this panel trim to our dining space here
Cyberspace dark blue walls with molding

See more of our home here. 
To shop items in our home, click here! 
Never miss a post by signing up to get posts via email

Source link